지금 같은 경쟁력이 심각한 상황에서IBM C2090-544시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.IBM C2090-544시험자격증 소지자들의 연봉은 당연히IBM C2090-544시험자격증이 없는 분들보다 높습니다. 하지만 문제는IBM C2090-544시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.
발달한 네트웨크 시대에 인터넷에 검색하면 많은IBM인증 C2090-544시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의IBM인증 C2090-544시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의IBM인증 C2090-544 실제시험 문제를 연구하여 만든IBM인증 C2090-544덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의IBM인증 C2090-544덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
IBM인증 C2090-544시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다IBM인증 C2090-544시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는IBM 인증C2090-544시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.
시험 번호/코드: C2090-544
시험 이름: IBM (DB2 9.7 Advanced DBA for LUW)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2014-02-09
ITExamDump에서 출시한 IBM 인증 C2090-544시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
IBM C2090-544인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.IBM C2090-544시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의IBM인증C2090-544시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며C2090-544시험은 한번에 패스할 수 있는 덤프입니다.
C2090-544 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2090-544.html
NO.1 You have a database with eight partitions on a single server. Immediately after
executing the following
command:
CREATE BUFFERPOOL mybp DEFERRED SIZE 3000
How much memory is consumed by buffer pool MYBP on the server?
A. 0 pages
B. 3000 pages
C. 24000 pages
D. 192000 pages
Answer: A
IBM자격증 C2090-544 C2090-544 C2090-544 C2090-544 dumps
NO.2 Database DB1 is defined on partitions 1 through 4, with the system catalog defined on
partition 2. This
database is configured with LOGRETAIN=YES and TRACKMOD=YES. On Sunday evening,
a full online
database backup completes successfully on all partitions. On Monday afternoon, a new table
space is
created in a database partition group defined on partitions 3 and 4. On Monday evening a
backup is
executed as follows :
BACKUP DATABASE db1 ONLINE INCREMENTAL
What are the results of this operation?
A. The backup completes successfully on the catalog partion only.
B. The backup completes successfully on database partitions 1 and 2, but fails on database
partitions 3
and 4.
C. The backup completes successfully on database partitions 3 and 4, but fails on database
partitions 1
and 2.
D. The backup completes successfully on all database partitions.
Answer: B
IBM시험문제 C2090-544 C2090-544 dumps C2090-544시험문제 C2090-544인증
NO.3 What is a method for enabling non-buffered I/O at the table space level in a DB2
database?
A. Set the DB2_DIRECT_IO configuration parameter to YES.
B. Set the DB2_FILESYSTEM_CACHE configuration parameter to YES.
C. Use the USE DIRECT IO clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
D. Use the NO FILE SYSTEM CACHING clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
Answer: D
IBM자료 C2090-544덤프 C2090-544 C2090-544
NO.4 Given the following statements:
CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE :\myfile1?1000,
FILE
:\myfile2?800);
ALTER TABLESPACE mytbsp EXTEND (FILE :\myfile1?200, FILE :\myfile2?400);
How large are the containers MYFILE1 and MYFILE2?
A. MYFILE1 = 200 pages, MYFILE2 = 400 pages
B. MYFILE1 = 1200 pages, MYFILE2 = 1000 pages
C. MYFILE1 = 1400 pages, MYFILE2 = 1200 pages
D. MYFILE1 = 1200 pages, MYFILE2 = 1200 pages
Answer: D
IBM C2090-544인증 C2090-544 C2090-544자격증 C2090-544 C2090-544
NO.5 A database named MYDB was created by executing the following command:
CREATE DATABASE mydb AUTOMATIC STORAGE NO
Later, a decision is made to modify this database so that both it and its table spaces use
automatic
storage.
What steps are required to make this modification?
A. Use the ALTER DATABASE command to convert the database; all existing table spaces
will be
converted automatically.
B. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing table spaces.
C. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing SMS table spaces.
D. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing DMS table spaces.
Answer: D
IBM기출문제 C2090-544 C2090-544 pdf
NO.6 Given the following table spaces, their associated page size, and number of pages:
TSP1 - 16K page size, 10000 pages
TSP2 - 8K page size, 10000 pages
TSP3 - 4K page size, 20000 pages
USERSPACE1 - 4K page size, 5000 pages
Which sets of buffer pools will ensure that all of the data in the table spaces will be fit into
memory for
optimal data access?
A. IBMDEFAULTBP - 16K page size, 85000 pages
B. IBMDEFAULTBP - 4K page size, 25000 pages
BP1 -16K page size, 20000 pages
C. BP1 - page size 8K, 45000 pages
D. BP1 - 4K page size, 30000 pages
BP2 - 8K page size, 20000 pages
BP3 - 16K page size, 15000 pages
Answer: D
IBM C2090-544 C2090-544자료 C2090-544 C2090-544 pdf
NO.7 A DBA wants to create table space named MYTBLSP in a database with five
partitions.
Which command will create the table space on all five partitions?
A. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P$NODES'
5000)
B. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P0' to
'/tbsp/cont1P4' 5000)
C. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P[0-4]' 5000)
D. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE '/tbsp/cont1P
$N' 5000)
Answer: D
IBM C2090-544최신덤프 C2090-544 pdf C2090-544 C2090-544 C2090-544
NO.8 Given a newly created database and sufficient memory. If the following statements are
successful:
CREATE BUFFERPOOL bp1 SIZE 40MB;
CREATE BUFFERPOOL bp2 PAGESIZE 16K SIZE 40000;
How much memory will be allocated for buffer pools BP1 and BP2?
A. 40MB
B. 80MB
C. 665MB
D. 680MB
Answer: C
IBM C2090-544 dumps C2090-544 C2090-544자격증 C2090-544
NO.9 if table space TBSP1 is using automatic storage, and the existing storage paths are
full, which
command would increase the available storage?
A. ALTER DATABASE ADD STORAGE ON '/db2/filesystem1'
B. ALTER TABLESPACE tbsp1 ADD ('/db2/filesystem1')
C. ALTER DATABASE ADD STORAGE FOR tbsp1 ('/db2/filesystem1')
D. ALTER TABLESPACE tbsp1 EXTEND USING ('/db2/filesystem1')
Answer: A
IBM C2090-544자료 C2090-544 C2090-544 C2090-544
NO.10 Assuming the following commands are executed in the order shown:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE 'C:\file1' 1 M, FILE 'C:\file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
CREATE TABLE tab_a (c1 INT, c2 CHAR(30), c3 XML) COMPRESS YES;
IMPORT FROM data.del OF DEL INSERT INTO tab_a;
If the following command is executed:
ALTER DATABASE mydb ADD STORAGE ON ?mnt/file_1? ?mnt/file_2?
Which statement is true?
A. The ALTER DATABASE command will fail because database MYDB was not created as
an automatic
storage database.
B. The ALTER DATABASE command will convert database MYDB to an automatic storage
database, and
table space TBSP1 will automatically be converted to an automatic storage table space.
C. Table space TBSP1 can be converted to an automatic storage table space at any time by
executing the
ALTER TABLESPACE statement.
D. Table space TBSP1 will be placed in Conversion Pending?state and must be converted to
an
automatic storage table space before it can be used.
Answer: C
IBM인증 C2090-544시험문제 C2090-544 C2090-544 pdf
NO.11 A table named TAB_A was created with the COMPRESS YES option specified and
populated with
100,000 rows. If a DBA wants to create an index on table TAB_A, which statement is true?
A. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option with the CREATE INDEX statement that is used to create it.
B. The index will automatically be compressed since the table it is associated with is
compressed; the
ALTER INDEX command does not have to be executed.
C. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option in the CREATE INDEX statement used to create it; however, the
index will not
be compressed until the ALTER INDEX command is used to create an index compression
dictionary.
D. The index will automatically be enabled for compression because the associated table is
compressed;
however, the index will not be compressed until it is REORGed.
Answer: B
IBM C2090-544 C2090-544
NO.12 Which action can be performed by the ALTER TABLESPACE statement?
A. Change an SMS table space to a DMS table space on any database partition.
B. Change the size of a container in an SMS table space.
C. Change the EXTENTSIZE setting for a table space on a database partition that currently
has no
containers.
D. Add a container to an SMS table space on a database partition that currently has no
containers.
Answer: D
IBM dumps C2090-544기출문제 C2090-544 dump C2090-544 C2090-544
NO.13 Which command produced the result shown below?
Tracking Memory on: 2010/02/18 at 21:18:19
Memory for database: SAMPLE
bph (2) utilh pckcacheh catcacheh bph (1) bph (S32K) bph (S16K)
4.2M 64.0K 256.0K 64.0K 288.0M 704.0K 448.0K
bph (S8K) bph (S4K) shsorth lockh dbh other
320.0K 256.0K 64.0K 10.0M 4.7M 128.0K
A. db2mtrk -i
B. db2mtrk -d
C. db2mtrk -p
D. db2mtrk -a
Answer: B
IBM C2090-544자료 C2090-544인증
NO.14 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
$>?
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert both the database and table space TBSP1?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: B
IBM자격증 C2090-544 C2090-544 C2090-544
NO.15 Considering you have an OLTP workload consisting of similar queries that are
repeatedly generated
and differ only in their predicate values, what can be done to reduce compilation overhead?
A. UPDATE DB CFG USING STMT_CONC LITERALS
B. UPDATE DB CFG USING SQL_CONC LITERALS
C. UPDATE DB CFG USING SQL_CONC YES
D. UPDATE DB CFG USING STMT_CONC OFF
Answer: A
IBM dumps C2090-544 C2090-544시험문제 C2090-544인증
NO.16 How can you change an existing non-partitioned index for a partitioned table to a
partitioned index?
A. Use the ALTER INDEX command.
B. Use the DROP INDEX and CREATE INDEX commands.
C. Use the REORG INDEX command.
D. Use the ALTER INDEX and REORG INDEX commands.
Answer: B
IBM C2090-544시험문제 C2090-544 C2090-544 C2090-544 C2090-544 pdf
NO.17 Table T1 was created by executing the following statement:
CREATE TABLE t1
(deptno CHAR(2) NOT NULL,
deptname VARCHAR(36) NOT NULL,
empno CHAR(3) NOT NULL)
Immediately after creation, table T1 was populated with 10 rows. Later, user USER1 ran an
application
that inserted 100,000 rows into table T1.
The following query is frequently ran against the T1 table:
SELECT deptno, empno, deptname FROM t1 WHERE deptno = 'EN' AND empno = '123'
Assuming current statics exist for the table and index, which index will provide optimal
performance for
this query?
A. CREATE INDEX idx1 ON t1 (deptno, empno) INCLUDE (deptname)
B. CREATE INDEX idx1 ON t1 (deptno, empno)
C. CREATE INDEX idx1 ON t1 (deptno) INCLUDE (empno)
D. CREATE INDEX idx1 ON t1 (deptno)
Answer: B
IBM C2090-544 C2090-544 dump
NO.18 A table space has been created in the default database partition group.
What must you do to change the partition group for that table space?
A. Export the table space and reload it into the new partition group.
B. Move the table space to the new partition group as parameters.
C. Drop the table space and re-create it in the new partition group.
D. Alter the table space, specifying the new partition group.
Answer: C
IBM pdf C2090-544기출문제 C2090-544덤프
NO.19 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert the database?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: A
IBM자료 C2090-544 dumps C2090-544기출문제 C2090-544 C2090-544 C2090-544최신덤프
NO.20 A DBA needs to create a federated database and configure access to join data from
three Oracle
instances and one DB2 database.
Which objects are needed to establish the specified connections?
A. 1 Oracle server , 1 DB2 server , 3 Oracle wrappers , and nicknames for each database
B. 1 Oracle server , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each database
C. 3 Oracle servers , 1 DB2 server , 3 Oracle wrappers , 1 DB2 wrapper , and nicknames for
each
database
D. 3 Oracle servers , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each
database
Answer: D
IBM C2090-544 C2090-544 C2090-544 C2090-544 C2090-544기출문제
ITexamdump의 C4040-122덤프의 VCE테스트프로그램과 HP0-Y46덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TERP10_65시험에 대비한 고품질 덤프와 70-481시험 최신버전덤프를 제공해드립니다. 최고품질 700-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기