IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의Avaya인증 3303덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의Avaya인증 3303덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의Avaya인증 3303덤프를 데려가 주시면 기적을 안겨드릴게요.
ITExamDump에는 전문적인 업계인사들이Avaya 3303시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.Avaya 3303자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.
IT업계에 종사하고 계시나요? 최근 유행하는Avaya인증 3303 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Avaya인증 3303덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Avaya인증 3303덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
지금 같은 상황에서 몇년간Avaya 3303시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Avaya 3303시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의3303시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은3303시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
시험 번호/코드: 3303
시험 이름: Avaya (Avaya Proactive Contact Implementation and Maintenance Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 82 문항
업데이트: 2014-02-18
3303 덤프무료샘플다운로드하기: http://www.itexamdump.com/3303.html
NO.1 In Avaya Proactive Contact 5.0, which application can be used to enable/disable the Agent Job list
feature?
A. Agent Application
B. Command User Interface (System Telnet)
C. Analyst
D. Editor
Answer: B
Avaya 3303자격증 3303기출문제
NO.2 A business has a three dialer pod (one primary and two secondary) and ten supervisor workstations.
How many Java processes should be running while checking mid-tier services (check_mts)?
A. 3
B. 4
C. 10
D. 13
E. 14
Answer: A
Avaya 3303 dumps 3303덤프
NO.3 A system is logging errors on a porter process during every reboot/restart of Proactive Contact. Which
two parameters, if mismatched, would cause this? (Choose two.)
A. PORTSinmaster, cfg
B. OPERATORS in master, cfg
C. MAXHIDSLOTS in master, cfg
D. H specified ports configuredindgswitch.cfg
E. N specified ports configured in dgswitch.cfg
Answer: A,E
Avaya pdf 3303 3303 3303인증 3303인증 3303시험문제
NO.4 A system operator needs to see failed login attempts on the Avaya Proactive Contact 5.X dialer. Which
login type must be used to see these failed attempts?
A. sysadm
B. system
C. auditor
D. reporter
Answer: C
Avaya 3303 3303 pdf 3303기출문제 3303
NO.5 On the Avaya Proactive Contact Analyst application, which section shows you Non-Contact and Error
summary reports?
A. Agent
B. Job
C. Administrative
D. Agent Monthly
Answer: B
Avaya시험문제 3303 3303 3303 3303기출문제
NO.6 A system operator reports that agents are randomly being disconnected from Proactive Contact Agent.
You have reviewed the available data and it is inconclusive. Since the problem is intermittent, you need to
set up the dialer so that it will gather the data you need in the future.
Assuming that the current date is February 19, 2011, which command would you enter in the hopes of
recording the next occurrence?
A. tail-facc*0219
B. check_errors 20110219
C. logadm -p opmon |7
D. logcat -p agent
Answer: C
Avaya시험문제 3303 3303 dump 3303
NO.7 What should the crontab of a secondary dialer have?
A. pds_maintenance
B. pds_maintenance and db_rnaintenance
C. pds_maintenance and mts_maintenance
D. pds_maintenance, mts_maintenance and db_mainlenance
Answer: B
Avaya기출문제 3303 dump 3303덤프
NO.8 A system supervisor uses Editor to create a new completion code for use in a Job that will run later in
the day. The job seems to start up without any problem, but when the supervisor looks at Monitor's Job
Completion Code view, no agents are releasing calls using the new code.
Which two Issues would contribute to this problem? (Choose two.)
A. The agents did not get the email describing the new completion code and the conditions for Itsuse.
B. The completion code changes are in the pending state and won't be available to agents until after the
next dialing application restart.
C. The Proactive Contact Agent application has not been updated to use the new completion code.
D. Monitor is not working properly. There should be at least a few calls with the new completion code.
E. The system supervisor forgot to add the new completion code to the agent keys file associated with the
job.
Answer: B,E
Avaya인증 3303 dump 3303 3303 3303자료
NO.9 Which three should you verify if a network connection error is suspected between the Avaya Proactive
Contact 5.X server and the PG230RM? (Choose three.)
A. Run lanscan and landiag and look for collisions and other errors on the internal network (lan0).
B. Verify the name (switch1) and IP address for the PG230RM matches between the /etc/hosts onthe
AvayaProactiveContact server and in the Network Configuration page on the PG230RM (under the
Current Internet Address).
C. Verify that SWITCHTYPE is set to DIGITAL in /opt/avaya/pds/etc/master.cfg on the Avaya Proactive
Contact server.
D. Verify you have an active flashing LED light on the front of the ENBC card indicating LAN activity.
E. Verify that there are four swif_dg processes running on the Avaya Proactive Contact server.
Answer: A,B,E
Avaya시험문제 3303 dump 3303자격증
NO.10 A system operator opens a Job Status view in the Avaya Proactive Contact Monitor and notices that
the status for job EXP100 is shown as Active, but the character-based Job Monitor no longer shows the
job as running. The system operator calls support and asks for an explanation.
Which three actions would you perform to begin troubleshooting the problem? (Choose three.)
A. Log on to the dialer and run check_db and check_mts.
B. Instruct the supervisor on how to generate debugging data in the cd.log file and ask the supervisor to
send you the output for analysis.
C. Tell the supervisor how to locate her personal directory and how to delete all the .cmv files foundthere.
D. Log on to the dialer and run sqlplus, and then enter the following query: SQL> select * from
mo_last_status;
E. Log on to the dialer and run sqlplus, and then enter the following query: SQL> select * from dialerdef;
Answer: A,D,E
Avaya dump 3303인증 3303 3303인증
NO.11 Which hardware component is required for a hard dialer Proactive Contact 5.X.?
A. Avaya Application Enablement Services (AES) 3.1 or later
B. Avaya Enhanced Network Bus Controller (ENBC)
C. Avaya Communication Manager (CM) 3.1 or later
D. TN-744-based Call Classifier Cards version "e" or later
Answer: B
Avaya 3303 3303
NO.12 A system supervisor calls support to report that when Job Agent view in Monitor is used, agents that are
on break cannot be seen.
What is the reason for this happening?
A. An agent who is on break is not really on a job. The supervisor should see that the agent is still on the
system by looking at a Dialer Agent view Instead.
B. The agents are exiting out of the Proactive Contact Agent (PC Agent) application rather than using the
"Go On Break" option in the PC Agent menu.
C. Display of agents who have used the "Go On Break" function of PC Agent application is not supported
in Monitor.
D. Monitor may not be configured to display agents who are on break.
E. An agent who has used the "Go On Break" function Is shown as "Off Job" in Monitor.
Answer: D
Avaya pdf 3303 3303 3303덤프
NO.13 What does db_mgr script do?
A. It stops and starts the database
B. It copies calling lists to *.old.
C. It rolls up the daily data into monthly statistics.
D. It removes all old and outdated files from the system.
E. It runs a backup of the database to DVD.
Answer: B
Avaya dumps 3303시험문제 3303 3303자료 3303덤프
NO.14 To configure the opt-out feature for a virtual job, you need to select the check-box against "Should 'opt
outs' be enabled". This enables other configuration parameters for this feature.
Which three configuration parameters are correct? (Choose three.)
A. Opt-out Digit: 5
B. When an opt-out happens, transfer to .. : Transfer to a VDN
C. Message to be played when opt-out fails : 1
D. When opt-out happens, transfer to : Transfer to an outbound job
E. Opt out Digit: #
Answer: A,B,C
Avaya 3303자격증 3303덤프 3303
NO.15 A Job is running on Avaya Proactive Contact 5.0 and the system operator notices that not enough
records are selected. The operator wants to change selection criteria to select more records and re-run
the call selection without stopping the job.
How can this be achieved?
A. Change the parameters and re-run the selection from Monitor.
B. Change the parameters and re-run the selection from Editor.
C. Change the parameters and re-run the selection from Command User Interface (CUI).
D. Change the parameters and re-run the selection from Analyst.
Answer: A
Avaya자격증 3303자격증 3303자격증 3303 3303
ITexamdump의 IIA-CIA-Part2덤프의 VCE테스트프로그램과 C2040-440덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 LOT-406시험에 대비한 고품질 덤프와 HP2-N37시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-Y46시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기