ITExamDump는ITExamDump의Microsoft인증 70-691덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Microsoft인증 70-691덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.
ITExamDump의Microsoft인증 70-691덤프는 인터넷에서 검색되는Microsoft인증 70-691시험공부자료중 가장 출중한 시험준비 자료입니다. Microsoft인증 70-691덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.
ITExamDump 의 Microsoft인증 70-691덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Microsoft인증 70-691덤프를 공부해보세요.
ITExamDump에서는 Microsoft인증 70-691시험을 도전해보시려는 분들을 위해 퍼펙트한 Microsoft인증 70-691덤프를 가벼운 가격으로 제공해드립니다.덤프는Microsoft인증 70-691시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
Microsoft인증 70-691시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. Microsoft인증 70-691시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의Microsoft인증 70-691는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. Microsoft인증 70-691덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.
시험 번호/코드: 70-691
시험 이름: Microsoft (TS: Windows HPC Server 2008, Developing)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 95 문항
업데이트: 2014-03-24
70-691 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-691.html
NO.1 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to ensure that when the application starts, a parameter value is communicated to each process
in the cluster by using a single call.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: B
Microsoft 70-691 70-691덤프 70-691
NO.2 printf("Pi = %d\n", pi);
NO.3 if (x*x + y*y <= 1.0)
NO.4 You plan to develop a parallel application by using Windows HPC Server 2008.
The application performs the following tasks:
x Performs multistep calculations
x Processes data by using the same code segment that runs on each compute node
You need to ensure that each compute process executes the same step simultaneously.
Which type of communication should you use?
A. Buffered
B. Collective
C. Non-blocking
D. Point-to-point
Answer: B
Microsoft 70-691 70-691 70-691
NO.5 if(commRank == 0) {
NO.6 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 MPI_Init(&argc, &argv);
02
03 {
04 // program part for rank 0
05
06 }
06 else
07 {
08 // program part for all other ranks
09 }
10 MPI_Finalize();
You need to ensure that the code in the rank 0 section only executes on the process that has a rank of 0.
Which code segment should you insert at line 02?
A. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size > 0)
B. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size == 0)
C. int rank
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
if (rank == 0)
D. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(hostName, &resultlen);
char masterName[] = "rank0";
if (strcmp(masterName, hostName) != 0)
Answer: C
Microsoft인증 70-691자격증 70-691 70-691자료 70-691
NO.7 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 int rank;
02 MPI_Comm_rank(MPI_COMM_WORLD, &rank);
03 // declaration of variable hostName
04 // code to execute
05
06 std::cout << "hostname of rank " << rank;
07 std::cout << ": " << hostName << "\n";
You need to ensure that a variable named hostName contains the name of the cluster node that the code
runs on.
Which code segment should you add at line 05?
A. char *hostName = getenv("MPI_HOSTNAME");
B. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(&resultlen, hostName);
C. char hostName[MPI_MAX_NAME_STRING];
int resultlen;
MPI_Comm_get_name(MPI_COMM_WORLD, hostName, &resultlen);
D. char hostName[256];
int resultlen = sizeof(hostName);
if (rank == 0)
{
gethostname(hostName, resultlen);
}
Answer: B
Microsoft최신덤프 70-691 70-691자료 70-691시험문제 70-691덤프
NO.8 pi = 4 * total/(commSize * totDarts);
NO.9 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
The application uses point-to-point communication.
The process that has a rank 0 sends an array of integer values to the rank 1 process by using the
following code segment. (Line numbers are included for reference only.)
01 int values[5];
02 MPI_Send(values, 5, MPI_INT, 1, 42,
03 MPI_COMM_WORLD);
You need to ensure that each receiving process is able to correctly receive the values in the most efficient
manner possible.
Which code segment should you use?
A. int values[5];
int buffer[5];
MPI_Reduce(buffer, values, 5, MPI_INT, MPI_SUM, 1, MPI_COMM_WORLD);
B. int values[5];
MPI_Status status;
MPI_Recv(values, 5, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
C. int value;
MPI_Status status;
MPI_Recv(&value, 1, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
D. int values[5];
MPI_Status status;
MPI_Recv(values, sizeof(int), MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
Answer: B
Microsoft 70-691시험문제 70-691 70-691 dump
NO.10 }
You need to ensure that the total number of numDarts is only available on the process that has a rank 0.
Which code segment should you insert at line 13?
A. MPI_Reduce(&numDarts, &total, 1, MPI_INT, MPI_SUM, 0, MPI_COMM_WORLD)
B. MPI_Allreduce(&total, &numDarts, 1, MPI_INT, MPI_SUM, MPI_COMM_WORLD)
C. MPI_Gather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, 0, MPI_COMM_WORLD)
D. MPI_Allgather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, MPI_COMM_WORLD)
Answer: A
Microsoft 70-691시험문제 70-691
10. You plan to develop a Microsoft Message Passing Interface (MPI) application by using Microsoft
Visual Studio.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application.
You need to ensure that the application compiles for a 64-bit architecture.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the Import Library property to msmpi.lib.
B. Set the Additional Dependencies property to msmpi.lib.
C. Set the Additional Library Directories property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
D. Set the Additional Manifest Dependencies property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
Answer: BC
Microsoft시험문제 70-691 70-691 70-691 70-691
11. You develop a parallel application by using Microsoft Visual Studio 2008.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application based on Microsoft Message Passing Interface (MPI). You set the
Debugger to Launch property to MPI Cluster Debugger.
You need to ensure that five processes are launched when the application is run in debug mode in Visual
Studio 2008.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the MPIRun Arguments property to -n 5.
B. Set the Application Arguments property to -n 5.
C. Set the MPIRun Working Directory property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin.
D. Set the MPIRun Command property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin\MPIExec.
E. Set the Application Command property to C:\Program Files\Microsoft HPC Pack 2008
SDK\bin\MPIExec.
Answer: AD
Microsoft자료 70-691 70-691 dumps 70-691덤프
12. You create a parallel application by using Microsoft Visual Studio 2008.
The application prints a message to the console of all Microsoft Message Passing Interface (MPI)
processes except for one. The application terminates and displays an error message.
You need to change the code in the application so that the application completes successfully.
Which set of tasks should you include in the application?
A. Include mpi.h
Link to msmpi.lib
Call MPI_Start
Call MPI_Comm_rank
Call MPI_Finalize
B. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_rank
Call MPI_Finalize
C. Include mpi.h
Link to ccpapi.tlb
Call MPI_Init
Call MPI_Comm_rank
D. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_size
Answer: B
Microsoft dumps 70-691 70-691 70-691 dump 70-691 70-691
13. You plan to create a parallel application by using Microsoft Visual C++.
You want to use the Microsoft Message Passing Interface (MPI) library in the application.
You need to ensure that the application can be compiled for both 32-bit and 64-bit platforms. You also
need to ensure that targeting both platforms requires minimum maintenance.
What should you do?
A. Create a separate project for each platform.
B. Create separate solution files for each platform.
C. Create separate custom build rules for each platform.
D. Create a separate build configuration for each platform.
Answer: D
Microsoft인증 70-691자료 70-691
14. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
The application process is named MPIApplication.exe. You plan to debug the application by using the MPI
Cluster Debugger in Visual Studio 2008.
You need to attach the debugger to the remote process on a compute node.
Which process should you attach to?
A. smpd.exe
B. mpiexec.exe
C. msvmon.exe
D. MPIApplication.exe
Answer: C
Microsoft 70-691 70-691 dump
15. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
You plan to debug the application by using Visual Studio 2008.
You need to configure the nodes that will be used for debugging.
What should you do?
A. Use the Cluster Debugger Configuration tool in Visual Studio.
B. Use the debugging pane in the Visual Studio project property pages.
C. Use the configuration pane in the Cluster Administration Console tool.
D. Use the node management pane in the Cluster Administration Console tool.
Answer: A
Microsoft 70-691시험문제 70-691자료 70-691시험문제 70-691
NO.11 }
NO.12
NO.13 You plan to develop a parallel application by using Windows HPC Server 2008.
You plan to use a method to control the calculations performed by each individual process.
You need to ensure that different commands can be sent to each process.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: A
Microsoft 70-691 70-691 dump
NO.14 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment that computes an approximation to Pi. (Line numbers are included
for reference only.)
01 static int totDarts = 10000;
02 int numDarts = 0;
03
04 MPI_Comm_size(MPI_COMM_WORLD, &commSize);
05 MPI_Comm_rank(MPI_COMM_WORLD, &commRank);
06
07 for(i = 0; i < totDarts; i++) {
08 x = 2 * (randomNr() - 0.5);
09 y = 2 * (randomNr() - 0.5);
NO.15 You plan to develop a single program multiple data (SPMD) application by using Windows HPC Server
2008.
You use multiple processes to perform intermediate calculations and to provide the results as a single
number.
You need to ensure that the intermediate results are collected and added together by using a single MPI
function.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: D
Microsoft 70-691 70-691
NO.16 ++numDarts;
NO.17 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to implement a method that will send different data to each process in a communicator by using
a single call.
Which function should you use?
A. MPI_Send
B. MPI_Gather
C. MPI_Reduce
D. MPI_Scatter
Answer: D
Microsoft 70-691 70-691 70-691 pdf 70-691
ITexamdump의 350-029덤프의 VCE테스트프로그램과 DC0-260덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MSC-321시험에 대비한 고품질 덤프와 000-N32시험 최신버전덤프를 제공해드립니다. 최고품질 70-465시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기