인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.
여러분은 우리. ITExamDump의Microsoft 70-503시험자료 즉 덤프의 문제와 답만 있으시면Microsoft 70-503인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.
지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.Microsoft 70-503인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.
인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. Microsoft 인증70-503인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의Microsoft 인증70-503로 시험을 한방에 정복하세요.
ITExamDump를 선택함으로 여러분은 Microsoft 인증70-503시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 Microsoft 인증70-503시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는Microsoft 인증70-503덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며Microsoft 인증70-503시험을 한번에 패스하도록 도와드립니다.
IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. Microsoft인증 70-503시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 Microsoft인증 70-503덤프로Microsoft인증 70-503시험을 준비해보세요. 시험패스가 한결 편해집니다.
시험 번호/코드: 70-503
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5 C Windows Communication Foundation)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 158 문항
업데이트: 2013-11-18
70-503 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-503.html
NO.1 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B
Microsoft 70-503 70-503 dump 70-503자격증
NO.2 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(Namespace="http://uri.contoso.com")]
02 public interface IMyService
03 {
04 [OperationContract]
05 string ProcessDetails(string s);
06 [OperationContract(Action="UpdateStatus")]
07 void UpdateStatus();
08
09 }
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 08?
A. [OperationContract(Action="*")]
void ProcessOthers(Message msg);
B. [OperationContract(Action="*")]
void ProcessOthers();
C. [OperationContract(Action="Default")]
void ProcessOthers(Message msg);
D. [OperationContract(Action="Default")]
void ProcessOthers();
Answer: A
Microsoft 70-503시험문제 70-503 70-503
NO.3 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Stream)
B. <OperationContract()> _
Sub UploadFile(ByVal xmlData As XmlWriter)
C. <OperationContract()> _
Sub UploadFile(ByVal xmlData As StreamWriter)
D. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Byte())
Answer: A
Microsoft 70-503시험문제 70-503 70-503덤프 70-503 70-503
NO.4 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Action:="*")> _
Sub ProcessSimpleOrder()
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
B. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
C. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract()> _
Sub ProcessSimpleOrder()
End Interface
<ServiceContract()> _
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
D. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
End Interface
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
Answer: C
Microsoft기출문제 70-503덤프 70-503 70-503 70-503 70-503
NO.5 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B
Microsoft 70-503 70-503 70-503 dumps 70-503인증
NO.6 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
<ServiceContract()> _
Public Interface IMyService
<OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
End Interface
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. <OperationContract( _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
B. <OperationContract( _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.NotAllowed)> _
Sub DoSomething()
C. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
D. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.Sign)> _
<TransactionFlow(TransactionFlowOption.Mandatory)> _
Sub DoSomething()
Answer: A
Microsoft자료 70-503자료 70-503 70-503
NO.7 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
<DataContract()> _
Public Class Person
...
End Class
<DataContract()> _
Public Class Customer
Inherits Person
...
End Class
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. <ServiceContract()> _
<ServiceKnownType("GetPerson")> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
B. <ServiceContract()> _
Public Interface IMyService
<OperationContract()> _
<ServiceKnownType("Customer")> _
Function GetPerson() As Person
End Interface
C. <ServiceContract()> _
<ServiceKnownType(GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
D. <ServiceContract()> _
<ServiceKnownType("GetPerson", GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
Answer: C
Microsoft pdf 70-503인증 70-503
NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub InitializeRuntime()
'Load configuration here
End Sub
End Class
B. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub ApplyConfiguration()
'Load configuration here
End Sub
End Class
C. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub InitializeDescription( _
ByVal serviceType As Type, _
ByVal baseAddresses As UriSchemeKeyedCollection)
'Load configuration here
End Sub
End Class
D. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub AddBaseAddresses(ByVal baseAddress As Uri)
'Load configuration here
End Sub
End Class
Answer: B
Microsoft자료 70-503 70-503 dumps 70-503 70-503 dumps
NO.9 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
<XmlElement()> _
Public Name As String
<XmlAttribute()> _
Public Currency As String
<XmlElement()> _
Public Balance As Double
End Class
B. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Order:=0)> _
Public Balance As Double
<DataMember(Order:=1)> _
Public Currency As String
End Class
C. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
Public Name As String
<XmlElement("Balance")> _
Public Balance As BalanceVal
End Class
<Serializable()> _
Public Class BalanceVal
<XmlText()> _
Public Amount As Double
<XmlAttribute()> _
Public Currency As String
End Class
D. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Name:="Balance", Order:=2)> _
Public Balance As BalanceVal
End Class
<DataContract()> _
Public Structure BalanceVal
<DataMember(Order:=0)> _
Public Amount As Double
<DataMember(Order:=1)> _
Public Currency As String
End Structure
Answer: C
Microsoft 70-503 70-503기출문제 70-503
NO.10 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C
Microsoft덤프 70-503자격증 70-503자격증 70-503
NO.11 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
<ServiceContract()> _
Public Interface IMathService
<OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
End Interface
You have not deployed the IMathService service.
You need to expose the AddNumbers (a As Double, b As Double) As Double operation to the
IMathService service contract.
Which code segment should you use?
A. <OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract()> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
B. <OperationContract(Name:="AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Name:="AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
C. <OperationContract(Action:="IMathService/AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="IMathService/AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
D. <OperationContract(Action:="AddInt/*")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="AddDouble/*")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
Answer: B
Microsoft 70-503자격증 70-503최신덤프 70-503 pdf
NO.12 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C
Microsoft기출문제 70-503덤프 70-503 70-503최신덤프 70-503자료
NO.13 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
NO.14 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
[ServiceContract]
public interface IMyService
{
[OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
}
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. [OperationContract(ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
B. [OperationContract(ProtectionLevel=
ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.NotAllowed)]
void DoSomething();
C. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
D. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.Sign)]
[TransactionFlow(TransactionFlowOption.Mandatory)]
void DoSomething();
Answer: A
Microsoft자료 70-503기출문제 70-503 70-503 70-503 70-503
NO.15 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. [DataContract]
public enum OrderState
{
Processing=1,
[DataMember]
Cancelled=2,
[DataMember]
Confirmed=3,
Closed=4
}
B. [DataContract]
public enum OrderState
{
Processing=1,
[EnumMember]
Cancelled=2,
Confirmed=3,
[EnumMember]
Closed=4
}
C. [DataContract]
public enum OrderState
{
[EnumMember(Value="False")]
Processing=1,
[EnumMember(Value="True")]
Cancelled=2,
[EnumMember(Value="True")]
Confirmed=3,
[EnumMember(Value="False")]
Closed=4
}
D. [DataContract]
public enum OrderState
{
[DataMember]
Processing=1,
[DataMember(IsRequired=true)]
Cancelled=2,
[DataMember]
Confirmed=3,
[DataMember(IsRequired=true)]
Closed=4
}
Answer: B
Microsoft 70-503 dump 70-503 70-503 dumps 70-503시험문제 70-503 dumps
NO.16 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(SessionMode:=SessionMode.Required)> _
02 Public Interface IOrderManager
03
04 Sub CloseOrder()
05 End Interface
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 03?
A. <OperationContract(IsInitiating:=False)> _
B. <OperationContract(IsTerminating:=True)> _
C. <OperationContract()> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
D. <OperationContract(IsTerminating:=False)> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
Answer: B
Microsoft시험문제 70-503인증 70-503 70-503 70-503 70-503
NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. <DataContract()> _
Public Enum OrderState
Processing = 1
<DataMember()> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
Closed = 4
End Enum
B. <DataContract()> _
Public Enum OrderState
Processing = 1
<EnumMember()> _
Cancelled = 2
Confirmed = 3
<EnumMember()> _
Closed = 4
End Enum
C. <DataContract()> _
Public Enum OrderState
<EnumMember(Value:="False")> _
Processing = 1
<EnumMember(Value:="True")> _
Cancelled = 2
<EnumMember(Value:="True")> _
Confirmed = 3
<EnumMember(Value:="False")> _
Closed = 4
End Enum
D. <DataContract()> _
Public Enum OrderState
<DataMember()> _
Processing = 1
<DataMember(IsRequired:=True)> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
<DataMember(IsRequired:=True)> _
Closed = 4
End Enum
Answer: B
Microsoft 70-503 70-503 70-503 dump
NO.18 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. <MessageContract()> _
Public Class MyMessage
<MessageHeader()> _
Public Data() As String
End Class
B. <MessageContract()> _
Public Class MyMessage
<MessageHeaderArray()> _
Public Data() As String
End Class
C. <MessageContract()> _
Public Class MyMessage
<MessageProperty()> _
Public Data() As String
End Class
D. <MessageContract()> _
Public Class MyMessage
<MessageBodyMember(Order:=0)> _
Public Data() As String
End Class
Answer: A
Microsoft기출문제 70-503 dump 70-503 70-503인증
NO.19 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B
Microsoft기출문제 70-503 70-503 pdf
NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A
Microsoft 70-503 70-503 dump 70-503
NO.21 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B
Microsoft기출문제 70-503 70-503덤프 70-503 70-503
NO.22 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A
Microsoft자료 70-503 70-503 70-503 70-503
NO.23 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Public Interface IMyService
02
03 Function ProcessString(ByVal name As String) As String
04 End Interface
You create a host for the WCF service. You also create a service endpoint at http: //localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http: //localhost:8080/service/process?name=value
Which code segment should you insert at line 02?
A. <OperationContract(Name:="process", Action:="Get")> _
B. <OperationContract(Name:="process", Action:="Post")> _
C. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Get")> _
D. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Post")> _
Answer: C
Microsoft자료 70-503기출문제 70-503 70-503시험문제 70-503
NO.24 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
B. Dim baseAddress As String = _ "http: //localhost:8000/ExamService/service"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
C. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New WSHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
D. Dim baseAddress As String = _
"http: //localhost:8000/ExamService/service"
Dim binding1 As New NetTcpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
Answer: B
Microsoft 70-503시험문제 70-503자격증 70-503시험문제
NO.25 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(Namespace:="http://uri.contoso.com")> _
02 Public Interface IMyService
03 <OperationBehavior()> _
04 Function ProcessDetails(ByVal s As String) As String
05 <OperationContract(Action:="UpdateStatus")> _
06 Sub UpdateStatus()
07
08 End Interface
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 07?
A. <OperationContract(Action:="*")> _
Sub ProcessOthers(ByVal msg As Message)
B. <OperationContract(Action:="*")> _
Sub ProcessOthers()
C. <OperationContract(Action:="Default")> _
Sub ProcessOthers(ByVal msg As Message)
D. <OperationContract(Action:="Default")> _
Sub ProcessOthers()
Answer: A
Microsoft 70-503 70-503자료 70-503 dumps
NO.26 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C
Microsoft dumps 70-503 70-503
NO.27 You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
<ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyService
<OperationContract()> _
Sub DoSomething()
End Interface
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. <ServiceContract(Namespace:="http: //contoso.com/services/V1")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
B. <ServiceContract(Name:="SvcOrder")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
C. <ServiceContract(Name:="SvcOrderV1", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
D. <ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
Answer: D
Microsoft시험문제 70-503자료 70-503 70-503
NO.28 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process?name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process?name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process?name={name}")]
Answer: C
Microsoft자격증 70-503 pdf 70-503 70-503자격증
NO.29 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
public class OrderImpl : IManageOrders {
public void MarkOrderClosed(int orderId){
try {
...
}
catch (SqlException exc){
throw new FaultException<DataFault>(new DataFault());
}
}
}
[DataContract]
public class DataFault {
}
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. [FaultContract(typeof(DataFault))]
B. [FaultContract(typeof(Exception))]
C. [FaultContract(typeof(SqlException))]
D. [FaultContract(typeof(FaultException))]
Answer: A
Microsoft 70-503 70-503 70-503 70-503
NO.30 5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
Public Class OrderImpl
Implements IManageOrders
Public Sub MarkOrderClosed(ByVal orderId As Integer) _
Implements IManageOrders.MarkOrderClosed
Try
...
Catch ex As SqlException
Throw New FaultException(Of DataFault)( _
New DataFault())
End Try
End Sub
End Class
<DataContract()> _
Public Class DataFault
End Class
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. <FaultContract(GetType(DataFault))>
B. <FaultContract(GetType(Exception))>
C. <FaultContract(GetType(SqlException))>
D. <FaultContract(GetType(FaultException))>
Answer: A
Microsoft 70-503인증 70-503 70-503 dump 70-503
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder",
?Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D
Microsoft 70-503 dump 70-503자료
ITexamdump의 100-500덤프의 VCE테스트프로그램과 70-466덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB6-871시험에 대비한 고품질 덤프와 M70-301시험 최신버전덤프를 제공해드립니다. 최고품질 70-332시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기