Dell인증 DC0-261시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Dell인증 DC0-261시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는Dell 인증DC0-261시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.
Dell인증DC0-261시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. 그 방법은 바로ITExamDump의Dell인증DC0-261시험준비덤프자료를 구매하여 공부하는 것입니다. 문항수도 적고 시험예상문제만 톡톡 집어 정리된 덤프라 시험합격이 한결 쉬워집니다.
ITExamDump 에서 제공해드리는 Dell인증DC0-261시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Dell인증DC0-261시험은ITExamDump 표Dell인증DC0-261덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.
여러분은 우리. ITExamDump의Dell DC0-261시험자료 즉 덤프의 문제와 답만 있으시면Dell DC0-261인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.
시험 번호/코드: DC0-261
시험 이름: Dell (Dell Storage Networking Professional Exam - Version 2)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 124 문항
업데이트: 2013-10-13
많은 사이트에서 Dell인증 DC0-261시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Dell인증 DC0-261덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
DC0-261 덤프무료샘플다운로드하기: http://www.itexamdump.com/DC0-261.html
NO.1 Which three statements are correct about using SnapView? (Choose three.)
A. Snapshots can take mere seconds to create.
B. Snapshots may be created using the admhost CLI utility.
C. SnapView can take snapshots, or point-in-time copies of LUNs.
D. SnapView can make clones, or 100% duplicate copies of a LUN.
E. Snapshots are volume-level and thus able to restore specific files.
Answer: ACD
Dell최신덤프 DC0-261 DC0-261 DC0-261 dump
NO.2 How are the LUNs for the Write Intent Log (WIL) configured?
A. WIL LUNs are configured automatically.
B. After manually binding the LUNs, the WIL is automatically configured.
C. WIL LUNs must be manually bound and allocated on a per-array basis.
D. WIL LUNs must be manually bound and allocated on one array. The WIL is then automatically
replicated to the other array.
Answer: C
Dell시험문제 DC0-261기출문제 DC0-261
NO.3 Which utility should you use to add LUN management functionality to a server when using SAN Copy?
A. naviadm
B. admhost
C. admcopy
D. admsnap
Answer: B
Dell DC0-261 DC0-261 DC0-261
NO.4 You are concerned that the loss of an SP might cause you to lose all of your existing snapshot
sessions. What should you do to prevent losing existing snapshot sessions?
A. add a UPS to the storage array
B. use PowerPath to gain failover support
C. select the Persistent mode when starting a snapshot session
D. Nothing, the Vaulting process automatically saves all snapshots to disk in the PSM LUN.
Answer: C
Dell자격증 DC0-261 DC0-261 DC0-261 dumps
NO.5 SAN Copy sessions offer which three capabilities? (Choose three.)
A. providing content push or pull capability
B. offloading Storage Array processing onto hosts
C. migrating data from older arrays to newer arrays in the same SAN fabric
D. distributing and collecting content between the central location and branch offices
Answer: ACD
Dell DC0-261 pdf DC0-261 DC0-261시험문제
NO.6 You have installed SAN Copy. Which statement is true?
A. The storage array must be rebooted.
B. SAN Copy cannot be upgraded, except by a complete re-install.
C. Any LUN within the SAN is automatically made available to be copied.
D. The admhost utility must be installed on each storage array that Navisphere Manager resides on.
E. SAN Copy sessions can be managed through the Navisphere Manager Enterprise Storage window.
Answer: E
Dell DC0-261 DC0-261덤프 DC0-261덤프
NO.7 Which three statements are correct about SAN Copy? (Choose three.)
A. SAN Copy can be installed on any model CX array.
B. SAN Copy is a storage array-based Data Mover application.
C. SAN Copy transfers data over a Fibre Channel SAN, as opposed to an IP LAN.
D. SAN Copy sessions can be managed either by Navisphere Manager or by CLI.
Answer: BCD
Dell DC0-261 DC0-261 pdf
NO.8 You have a source LUN on a CX500 for which you maintain snapshots for tape backup. You need to
create a new snapshot for this source LUN but are unable to do so. You can create snapshots of other
source LUNs on the array. What is the most likely problem?
A. You have reached the maximum limit of 50 Cache LUNs.
B. You have reached the maximum limit of 8 snapshots per source LUN.
C. You have reached the maximum limit of 150 snapshots per storage system.
D. You have reached the maximum limit of 300 snapshots per storage system.
Answer: B
Dell dumps DC0-261 DC0-261 DC0-261 dump
NO.9 Which three statements are correct about clones? (Choose three.)
A. Clones can be copied using SAN Copy to a remote storage array.
B. Clones typically consume about 20% of the size of the source LUN.
C. Fractured clones can later be synchronized with the source LUN to update the contents.
D. Clones can be fractured from the source LUN, then mounted to a secondary host and accessed just
like another LUN.
Answer: ACD
Dell자격증 DC0-261 DC0-261시험문제
NO.10 Which three operations are possible using clones? (Choose three.)
A. Up to eight clones can be made from a single source LUN.
B. While a clone is fractured, it can be connected to a host for use.
C. A fractured clone can be accessed for read and write operations.
D. A snapshot of a clone must be reverse synchronized prior to mounting.
E. A live clone can be mounted by a secondary host to use as a standard LUN.
Answer: ABC
Dell최신덤프 DC0-261시험문제 DC0-261
NO.11 You want User1 to have Administrator access to storage system A that is located in a branch office.
However, you want User1 to have read-only access to the remaining storage systems within the domain.
Which scenario best accomplishes this task?
A. User accounts must be either global or local because the user inherits the most restrictive role
assigned to the user.
B. Create a local account with Administrator access on storage system A, then create a global account for
User1 with Monitor access.
C. Create a global account with Monitor access on storage system A, then modify the account policy to
allow User1 to administer only storage system A.
D. Create a global account with Monitor access on the master node, then have User1 log in to storage
system A using the local default manager account.
Answer: B
Dell인증 DC0-261 DC0-261 DC0-261
NO.12 Which four LUN characteristics can be displayed in Navisphere Analyzer? (Choose four.)
A. Bytes Tx / Rx
B. Utilization (%)
C. Capacity (GB)
D. Response Time (ms)
E. Total Bandwidth (MB/sec.)
F. Total Throughput (I/O /sec.)
Answer: BDEF
Dell DC0-261시험문제 DC0-261자료 DC0-261 DC0-261자격증
NO.13 Which two tasks can Navisphere Analyzer perform? (Choose two.)
A. comparing archived and real-time performance data
B. tracking performance trends for Dell / EMC switches
C. tracking performance trends for Dell / EMC storage arrays
D. tracking performance trends for hosts connected to Dell / EMC Storage Area Networks (SANs)
Answer: AC
Dell DC0-261자료 DC0-261 DC0-261 DC0-261덤프
NO.14 Which two are examples of how SnapView can be used in conjunction with MirrorView? (Choose two.)
A. SnapView can be used to take a snapshot of the remote mirror for use at the remote site.
B. SnapView can be used to take a snapshot of the remote mirror and then back up the snapshot to tape.
C. SnapView can be used to take a snapshot of the primary mirror and then mirror the snapshot to the
remote site.
D. SnapView can be used to take a snapshot of the remote mirror and then clone the snapshot for use at
the primary site.
Answer: AB
Dell dump DC0-261 DC0-261 DC0-261 DC0-261 DC0-261
NO.15 Which two states can a clone LUN be in before it can be fractured? (Choose two.)
A. consistent
B. synchronizing
C. synchronized
D. reverse out-of-sync
Answer: AC
Dell DC0-261 DC0-261최신덤프 DC0-261
NO.16 You are connecting a CX700 to a CX500 through a fabric for Mirrorview. Which two zones must be
completed? (Choose two.)
A. Port 1 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
B. Port 1 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
C. Port 3 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
D. Port 3 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
Answer: CD
Dell기출문제 DC0-261 dumps DC0-261인증 DC0-261덤프
NO.17 Which statement best describes bi-directional mirroring as implemented by MirrorView ?
A. By utilizing two storage systems, a single storage system can be configured as the primary for one
mirror and a secondary for another mirror.
B. By utilizing two storage systems and one tape drive, the two storage systems are configured as a
primary and the secondary is backed up to tape.
C. By utilizing two storage systems, a single storage system is configured as the primary and the other
storage system is configured as the secondary.
D. By utilizing three storage systems, the two storage systems are configured as a primary and the third
storage system is configured as a secondary that is used to store the primary images.
Answer: A
Dell dumps DC0-261시험문제 DC0-261기출문제
NO.18 You want to implement site level disaster recovery. Which two are valid options to consider? (Choose
two.)
A. Use SAN Copy to copy LUNs from the primary site to the recovery site.
B. Use SAN Copy to mirror a LUN from the primary site to the recovery site.
C. Use MirrorView to mirror LUNs from the primary site to another local array.
D. Use SnapView to create a clone, then use SAN Copy to copy the clone to the recovery site.
Answer: AD
Dell dumps DC0-261최신덤프 DC0-261 pdf DC0-261시험문제
NO.19 How many LUNs are required for the Clone Private LUN?
A. one per SP
B. one per clone
C. one per clone group
D. one per storage system
Answer: A
Dell기출문제 DC0-261 DC0-261자격증 DC0-261 dump DC0-261인증
NO.20 What steps should you perform to create a copy of a source LUN in a second storage array, while
minimizing unavailability of the source LUN?
A. use SAN Copy to copy the source LUN, then take a snapshot on the second storage array
B. take a snapshot of the source LUN, then use SAN Copy to copy the snapshot to the second storage
array
C. take a snapshot of the source LUN, then use SAN Copy to copy the source LUN to the second storage
array
D. take a snapshot of the source LUN, run MirrorView to mirror the snapshot to the second array, then
use SAN Copy to synchronize the mirror with the source LUN
Answer: B
Dell DC0-261인증 DC0-261 DC0-261자격증 DC0-261시험문제
ITexamdump의 HP2-N37덤프의 VCE테스트프로그램과 ICYB덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 200-101시험에 대비한 고품질 덤프와 MB6-700시험 최신버전덤프를 제공해드립니다. 최고품질 70-492시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기