2013년 9월 4일 수요일

IBM 000-314 덤프데모

영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인IBM인증 000-314시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. IBM인증 000-314시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의IBM인증 000-314덤프는 IBM인증 000-314시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.

취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. IBM인증 000-314시험은 널리 인정받는 인기자격증의 시험과목입니다. IBM인증 000-314시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의IBM인증 000-314덤프는 시험패스율이 높아IBM인증 000-314시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.

시험 번호/코드: 000-314
시험 이름: IBM (IBM WebSphere Message Broker V6.1. System Administration)

IBM인증 000-314시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ITExamDump에서 연구해 내었습니다. 그건 바로ITExamDump의IBM인증 000-314덤프로IBM인증 000-314시험에 대비하는것입니다. ITExamDump의IBM인증 000-314덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.

ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.IBM 000-314시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-314시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

IBM 000-314인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이IBM인증시험중의000-314시험을 안전하게 패스하도록 도와줍니다. ITExamDump에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다

000-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-314.html

NO.1 Files in the specified input directory are not being processed by a flow that uses a FileInput node. The
error messages indicate that the file nodes cannot continue executing (BIP3331). What is the cause of the
error messages?
A.The file is locked during this directory scan.
B.The input file exceeds the maximum file size.
C.The broker does not have the required access to these files and directories.
D.There is more than one instance of this message flow deployed to this computer.
Answer:C

IBM기출문제   000-314   000-314기출문제   000-314 dumps

NO.2 A broker administrator must set up policy set bindings for a new message flow. The flow includes the
following SOAP nodes: SOAPInput, SOAPAsyncRequest, SOAPAsyncResponse and SOAPReply. Which
two SOAP nodes result in the need for a consumer policy set binding definition?
A.SOAPInput
B.SOAPReply
C.SOAPAsyncRequest
D.SOAPAsyncResponse
Answer:C D

IBM dumps   000-314   000-314 dumps   000-314시험문제

NO.3 A company has its broker BRK running on machine brk.comp.com under the queue manager BRKQM
listening at port 1414. It is registered to configuration manager CFGMGR running on machine
cfg.comp.com under the queue manager CFGQM listening at port 1420. An administrator is entrusted
with the task of creating an execution group EXE1 under the broker BRK. Which command should be run
to achieve this task?
A.mqsicreateexecutiongroup -i brk.comp.com -q CFGQM -b BRK -e EXE1
B.mqsicreateexecutiongroup -i cfg.comp.com -n CFGMGR -b BRK -e EXE1
C.mqsicreateexecutiongroup -i cfg.comp.com -p 1420 -q CFGQM -b BRK -e EXE1
D.mqsicreateexecutiongroup -i brk.comp.com -p 1414 -q BRKQM -b BRK -e EXE1
Answer:C

IBM pdf   000-314 dump   000-314   000-314 dumps   000-314

NO.4 A broker domain has two brokers, BRK1 and BRK2, configured to a configuration manager CFGMGR.
A new set of applications wants to take advantage of the publish/subscribe topic-based security. Which
steps does the administrator need to perform?
A.Create a UserNameServer and run the mqsichangeproperties command on the brokers and the
configuration manager to include the UserNameServer name.
B.Run the command mqsichangeproperties command on the brokers and mqsichangeconfigmgr on the
configuration manager to activate Access Control List's on the topics.
C.Run the command mqsijoinmqpubsub against each application name and change all the brokers with
the mqsichangebroker command to enable the security option on topics.
D.Create a UserNameServer and run the mqsichangebroker command on the brokers and
mqsichangeconfigmgr on the configuration manager to include the UserNameServer queue manager
name.
Answer:D

IBM   000-314기출문제   000-314   000-314인증

NO.5 A large enterprise is building several application message flows that include HTTPInput nodes. There is
a requirement to take advantage of WS-Security for the decryption of incoming messages to these flows
as well as encryption of data from the flows. The administrator needs to handle the necessary
configuration. What is the most efficient way to do this with the least impact on changing code or broker
configuration?
A.Use the IBM WebSphere MQ Internet Gateway.
B.Implement a WebSphere DataPower appliance.
C.Set up IBM WebSphere Transformation Extender for Integration Servers.
D.Create a new broker on a separate system using it to front-end all the security.
Answer:B

IBM덤프   000-314 dump   000-314덤프   000-314

NO.6 A developer is writing an application that needs to coordinate the processing of MQ messages and
database updates in a message flow for distributed systems. What does the broker administrator need to
configure as the XA Resource Manager?
A.The broker
B.The database
C.The queue manager
D.The operating system
E.The configuration manager
Answer:C

IBM   000-314인증   000-314   000-314   000-314

NO.7 A company's IT division has a broker domain consisting of a single broker BRK configured to
configuration manager CFGMGR. Both the components are running on a single AIX server. A new
security policy was put in place by the company which required all components to be started and stopped
under a new user ID. Which setup does the administrator need to perform to enable the broker and
configuration manager to be started or stopped with the new user ID?
A.Create a UserNameServer and add the new user ID.
B.Add the new user ID to mqm and mqbrkrs groups of the machine.
C.Run the mqsichangebroker command with the new user ID and password.
D.Run the mqsichangedbimgr command with the new user ID and password.
E.Run the mqsisetdbparms command adding the new user ID and password.
Answer:B

IBM   000-314   000-314자격증   000-314   000-314 dumps

NO.8 The administration team has decided to retain control over the infrastructure but wants to allow the
developers to deploy flows at will in the development environment. The developers need to change trace
and debug properties of execution groups (EGs), but not brokers. Which Access Control List (ACL)
permissions do the developers require?
A.Full to the EGs
B.View to the Root and Edit to the EGs
C.View to the Brokers and Deploy to the EGs
D.Deploy to the Brokers and Edit to the EGs
Answer:A

IBM시험문제   000-314   000-314덤프

NO.9 A large bank has six brokers that are geographically dispersed. Three of the brokers are used in a
publish/subscribe collective while three are not. For backup purposes, the decision has been made to use
three cloned brokers. Which choice is the most appropriate?
A.Use only one broker in the collective as a clone.
B.Use all three of the brokers in the collective as the clones.
C.Make two brokers from the collective clones, in case one fails.
D.Use no brokers in the collective as clones, it is not permitted.
Answer:A

IBM자료   000-314 pdf   000-314   000-314   000-314

NO.10 An administrator has set up topic-based security as shown in the Exhibit. Which user(s) will have
access to perform publish action on the topic TopicA/TopicY/TopicM?
A.Only user1
B.Only user2
C.Only user3
D.Both user1 and user3
Answer:A

IBM   000-314인증   000-314자료   000-314 dumps

NO.11 A production broker in a large bank is being configured to allow WebSphere Application Server to be the
JMS provider. Defaults were used for directory paths during installation of the product. When creating a
JMSProvider configurable service for the WebSphere_WAS_Client, the administrator issues the following
command: mqsichangeproperties WBRK6_DEFAULT_BROKER -c JMSProviders -o
WebSphere_WAS_Client By default, where must the provider's Jar files be located on an AIX production
broker system?
A./var/mqsi/shared-classes
B./opt/IBM/mqsi/6.1/classes
C./var/mqsi/common/profiles
D./opt/IBM/mqsi/6.1/JMSProviders
Answer:A

IBM   000-314   000-314   000-314최신덤프   000-314

NO.12 A broker administrator needs to connect via the Configuration Manager Proxy API Exerciser to a
configuration manager running on Solaris which was configured using default settings and managing a
BRKR1 broker running on a Windows XP environment. What four selections need to be furnished to
successfully connect to the configuration manager?
A.Port number 1414
B.Configuration Manager name
C.BRKR1 queue manager name
D.Configuration Manager hostname
E.SYSTEM.BKR.CONFIG channel name
F.Configuration Manager queue manager name
G.SYSTEM.DEFAULT.BKR.CONFIG channel name
Answer:A D E F

IBM시험문제   000-314   000-314인증   000-314기출문제   000-314

NO.13 A developer has built a flow that uses the EmailOutput node to send notifications of order shipments.
The SMTP server requires authentication with a specific user ID and password. What does the
administrator need to do before the developer attempts to deploy the flow?
A.Create a security identity with mqsisetdbparms.
B.Update the default SMTP configurable service with mqsiupdatebroker.
C.Create a SMTP configurable service with mqsicreateconfigurableservice.
D.Include the message set that contains the SMTP configuration information.
Answer:A

IBM   000-314 dump   000-314

NO.14 A large utility company has decided to implement messaging using WebSphere MQ with WebSphere
Message Broker (WMB) V6.1. The production broker will be hosted on the z/OS system where Resource
Recovery Service (RRS) has been configured and is active. What must the administrator do to ensure all
transactional message flows will be globally coordinated on this production broker?
A.Nothing.
B.Ensure the message flow is configured as a coordinated transaction in the bar file.
C.In the bar file, ensure the Transaction mode setting for the MQInput node is properly set to "Yes" and all
other Transaction modes are set to "Automatic".
D.Configure DB2 for XA coordination; configure the queue manager for XA coordination; and ensure the
message flow is configured as a coordinated transaction in the bar file.
Answer:A

IBM자료   000-314   000-314   000-314

NO.15 In a new implementation of the WebSphere Message Broker (WMB), an insurance company has
decided that the Message Broker Explorer (SupportPac IS02) will be implemented. They have never used
JMS with WebSphere MQ. Which feature in the Message Broker Explorer requires MQ JMS configuration?
A.Adopt a new broker
B.Full service tracing
C.WebSphere DataPower Security Wizard
D.Connect to a remote configuration manager
Answer:C

IBM dump   000-314   000-314 pdf

NO.16 An administrator needs to control domain objects that are deployable. To which three objects is it
possible to grant the Deploy Access Control List (ACL) permission?
A.Broker
B.Topology
C.Root Topic
D.Subscription
E.Execution Group
F.Configuration Manager
Answer:A C E

IBM   000-314기출문제   000-314 dump   000-314

NO.17 An administrator wants to quickly configure a broker to make use of HTTP over SSL on a development
environment with minimum configuration. Which property must be set by running the command
mqsichangeproperties?
A.port
B.keystorePass
C.keystoreFile
D.enableSSLConnector
Answer:D

IBM기출문제   000-314   000-314

NO.18 An application has a requirement that tables in the broker database be accessible with an ID that is not
the service ID of the broker using ODBC Data Source Names (DSN). What are the two tasks the
administrator needs to do?
A.Create an ODBC DSN to the broker database with mqsicreatedb.
B.Setup an ODBC DSN to the broker database with mqsi_setupdatabase.
C.Define an ODBC DSN to the broker database with another alias name.
D.Associate the application ID and password with the alias name with the mqsisetdbparms command.
E.Associate the application ID and password with the alias name with the mqsisetsecurity command.
Answer:C D

IBM dumps   000-314   000-314

NO.19 Under a load test in the Pre-PROD environment, the performance test has shown that the broker
cannot sustain the required peak number of HTTP connection requests. What is an appropriate action?
A.Create another Execution Group and deploy another copy of the flow.
B.Change the httplistener component parameter '-n maxThreads' to a higher value.
C.Increase the number of 'Additional Instances' of the flow and redeploy the flow.
D.Increase the number of 'Additional Instances' of the HTTPInput node and redeploy the flow.
Answer:B

IBM최신덤프   000-314   000-314 dumps

NO.20 As part of the migration from WebSphere Message Broker (WMB) V6.0 to V6.1, a developer has
provided the administrator a list of Java user-defined nodes that need to be migrated. The migration will
be from WMB V6.0 on one machine to WMB V6.1 on a different machine. Which three steps need to be
performed?
A.Clean the project in the Package Explorer.
B.Import the user-defined node project into the V6.1 Toolkit.
C.Use Rational Product Updater (RPU) to perform the migrations.
D.Run mqsimigratecomponents specifying the user Jar files directory.
E.Store the .pdb file in the directory specified by the -l parameter on the mqsichangebroker command.
F.Store the .jar file in the directory specified by the -l parameter on the mqsichangebroker command.
Answer:A B F

IBM기출문제   000-314자료   000-314

ITExamDump는IBM 000-314인증시험의 촉매제 같은 사이트입니다.IBM 000-314인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이IBM 000-314인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의IBM 000-314덤프자료가 많은 도움이 될 것입니다.

댓글 없음:

댓글 쓰기